RAMPE ELECTROHIDRAULICE DE EGALIZARE |
 |
| |
Upper plate of the dock leveller is a 6-8 mm thick
steel sheet with lentiform (diamond) riffling with
height 0.5-2.4 mm. If loading/unloading is performed
using a standard 4-wheel forklift with inflatable
tyres, the dock leveller is manufactured with
6 mm thick sheet and riffling height 0.5-1.5 mm. If
loading/unloading is performed using equipment
with high point load (for example, electric pilers),
the dock leveller is manufactured 8 mm thick steel
sheet with riffling height 0.8-2.4 mm. Small deformation
of the dock leveller upper sheet is admissible,
as it does not effect operation of the product. The
lip is made of steel 12 mm thick sheet with diamond
riffling height 1.2-3.6 mm. The reinforcement profiles
can be made of flanged beams 100/120 mm or
L-shaped profile 140x40x4 mm, the frame is made
of channel bar 100/120 mm. If the profile length exceeds
3500 mm, the reinforcement profiles and the
frame are made of flanged beams 120 mm. |
| |
 |
| |
 |
| |
 |
| |
| Upper plate of the dock leveller is a steel 8-10 mm
thick sheet with 0.8-3 mm high riffling. If loading/
unloading is performed using a standard 4-wheel
forklift with inflatable tyres, the dock leveller is manufactured
with 8 mm thick sheet and riffling height
0.8-2.4 mm. If load capacity is 10000 kg, the dock
leveller is manufactured 10 mm thick steel sheet with
riffling height 1-3 mm. Small deformation of the
dock leveller upper sheet is admissible, as it does not
effect operation of the product. The lip is made of
steel 12 mm thick sheet with diamond Riffling height
1.2-3.6 mm. The reinforcement profiles can be made
of flanged beams 100/120 mm or L-shaped profile
187x70x4 mm, the frame is made of channel bar or
flanged beam 100-120 mm. |
| |
 |
| |
 |
| |
| Upper deck of the dock leveller is made of steel
5 mm thick sheet with 0.5-1.5 mm high riffling and
designed for work with a standard 4-wheel forklift
with inflatable tyres. Small deformation of dock
leveller surface is admissible, as it does not effect
operation of the product. The lip is made of steel 12
mm thick sheet with 1.2-3.6 mm high riffling. The
reinforcement profiles can be made of flanged beam
100 mm or L-shaped profile 140x140x4 mm, the
frame is made of channel 100 mm. |
| |
 |
| |
 |
| |
 |
| |
| Upper deck of the folding track is made of steel
5 mm thick sheet with 0.5-1.5 mm high riffling and
is designed for work with hydraulic hand-trucks
and standard 4-wheel forklifts with inflatable tyres.
Upon customer's request the track can be designed
for work with equipment, which has high point
load, such as electrical pilers. Small deformation of
track upper sheet is admissible, as it does not effect
operation of the product. The lip is made of steel
12 mm thick sheet with 1.2 -3.6 high mm riffling.
The reinforcement profiles of the track are made
of tube 60x40x3 mm. The track is equipped with
lever balancing system, based on 2 springs and
roller support. The guide rail is made of hot-rolled
channel 160 mm. |
| |
 |
| |
 |
| |
 |
| |
| The side bearing profiles of the mobile ramp is
made of flange beam 360 mm, cross beam profile
is made of flange beam 100mm. The passage way is
made of steel galvanized gratings which is made of of
bearing stripes 30x3 mm with ribs of twisted square
bar 5 mm. The standard mobile ramp is designed for
loading/unloading using standard 4-wheel forklift
with inflatable tyres, if maximal point load does not
exceeds 1.3 N/mm2. For equipment with high point
load, for example electrical pilers, it is necessary to order
specially designed ramps (maximal load is 6.5N/
mm2). The lip is made of 12 mm thick steel sheet with
riffling height 1.2-3.6 mm. The entry on the ramp
is also made of 8 mm thick steel sheet with riffling
height 0.8-2.4 mm.
Small deformation of the gratings and the ramp
entry deck is admissible, as it does not effect operability
of the product. |
| |
 |
| |
 |
| |
| The table cocnsist of a pair or several pairs of crisscross
legs (scissor), a platform with a safety frame, a
bottom frame, hydraulic cylinders and a control unit.
The hydraulic power pack can be positioned either
inside or outside the table frame. |
| |
 |
| |
|
PROMOŢII
 Barieră automată 4 metri
Conţine: corp barieră, braţ barieră, suport fix barieră, lampă, fotocelule şi 1 telecomandă.
Specificaţii tehnice:
alimentare 230V, timp de deschidere 6 secunde, ip54, temperatura de lucru -40°C +35°C. |
| |
 Automatizare poartă culisantă 4 metri
Conţine: motor cu bază de comandă, cremalieră 4 m, fotocelule, lampă cu antenă, 2 telecomenzi.
Specificaţii tehnice: alimentare 230V, ip44, temperatura de lucru -40°C +60°C, pentru porţi 800 kg. |
| |
Pentru a veni în sprijinul dvs. şi pentru a vă economisi timpul, vă oferim servicii complete:
• măsurători & antecalculaţii;
• consultanţă gratuită;
• transport şi montaj;
• garanţie pentru montaj;
• garanţie pentru produse;
• service şi piese de schimb. |
|
|
|
